Wednesday, September 18, 2019
Effect of temperature on rate of reaction :: GCSE Chemistry Coursework Investigation
Effect of temperature on rate of reaction Aim: To find out if the temperature increases the rate of reaction of two chemicals. Prediction: My prediction is that the higher the temperature is the faster the rate of the reaction will be. Equipment: Hot water, thermometer, flask, cold water, stopwatch, tissue paper, paper with ââ¬ËXââ¬â¢ marked on it, safety glasses, measuring cylinder, large beaker, sodium thiosulphate, hydrochloric acid. Method: The experiment has to be done five times for the five different temperatures of the sodium thiosulphate. The temperatures are: 20à °C, 30à °C, 40à °C, 50à °C and 60à °C To start the experiments fill the flask with 50cmà ³ of sodium thiosulphate into the large beaker. Fill the large beaker up with the water of right temperature that is required for the experiment. Put the thermometer into the flask with sodium thiosulphate and check the temperature is right for the experiment. If the water is too cold, in the large beaker pour in some more hot water or if it is too hot pour in some cold water to reach the required temperature for the sodium thiosulphate. Once the sodium thiosulphate is the right temperature, take it out of the water, wipe the bottom of the flask with tissue paper and place it onto the piece of paper with ââ¬ËXââ¬â¢ marked on it. Now measure 5cmà ³ of hydrochloric acid in the measuring cylinder. Then pour the hydrochloric acid into the sodium thiosulphate, at this moment start timing with the stopwatch and keep timing until you cannot see the ââ¬ËXââ¬â¢ mark through the liquid. Make sure you wear safety glasses and handle the acid carefully. Fair Test: To make this investigation fair you have to make sure you use the same concentration of hydrochloric acid for all experiments. You also have to make sure you use the same amount of hydrochloric acid and sodium thiosulphate for all the experiments. Also make sure you time the experiments accurately. Observation: My observation was that when the temperature of the sodium thiosulphate was higher the solution turned cloudy quicker. Results: -------------------------------------------- Temperature (à °C) Time for cross to disappear (minutes) 20 2.49 30 1.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.